New Nordic Components PMag Extension - this is the
new 18 round PMag extension offering from Nordic. Replaces the
older style aluminum coupler for a lighter, more streamlined magazine,
with the added feature of the clear bottom to easily determine how many
rounds are in the mag. Provides a total 48 round capacity.
Compatible with EMags and all versions of PMags with the exception of any recalled
mags produced prior to June 2007.
Available in clear for easy viewing of rounds loaded, and black for that
unibody, streamlined look. Clear model shown in picture above.
Click
Here
for windowed PMags with Nordic Extension
installed.
Nordic Tactical Comp - if you've been looking for an effective small,
low profile comp, then this is it. This six port design is very effective.
Comes in 416 stainless steel and black oxide models. Standard 1/2 x 28
threads and includes peel washer. Measures 1.75 inches long (nearly an
inch of which threads onto the barrel) and .75 inches in diameter.
AR22 Kit - this patent pending kit includes main body, scope rail and forearm adaptor.
You provide the Ruger 10/22 and your choice of buttstock, grip, and forearm.
Works with both factory and aftermarket 10/22 barrels. Makes a great
plinking gun, or a great 3 gun practice rifle as the ergonomics and feel of the
AR22 is identical to that of your AR15 rifle. Drop in installation with no
gunsmithing required. Available in black only.
New lower price.
Our new FAQ page might be helpful if you have more questions. Check
it out
Here
 
Nordic Components Extended Magazine Tube - these are the best tubes
available in my opinion. Available in +1 through +8 lengths.
Nordic Component shell capacity is referenced as the shell increase
above the stock capacity. For example, if your Benelli Nova holds 4 shells in the factory tube, and you install a +4
Nordic tube on your gun, you'll end up with a 9 round total capacity; 8 in the
tube and 1 in the chamber. Order the tube length desired, which
includes spring and end cap, and then order the appropriate barrel nut
as a separate item.
Need to know if a particular tube will extend beyond
your barrel? Click Here
for application notes and tube length specifications.
Nordic Components Extended Magazine Tube -
includes spring
but no barrel nut. Order barrel nut below.
Nordic Components Barrel Nut for Extended Magazine Tube -
does not include tube and spring. See above.
The Benelli Nova barrel nut also works on the CZ712.
Nordic Mag Tube Replacement Spring - not a bad idea to replace the mag
tube spring every 12 months or so.
Nordic Extra Long Tube Cap - replace the cap on your Nordic shotgun
extended magazine tube with this extra long version to give you a little more
room. This cap is 3/4" longer than the standard cap. Makes loading that last shell a little easier. Also brings the
+5 tube out exactly even with the barrel on 21" Benelli guns.
Note: due to changes over time in the thread
pattern on various tubes, there is no guarantee the long cap will work on your
pre-existing tube. This tube is best ordered at the same time as the tube
so we can test fit a cap to ensure it will fit.
Available in XL which adds 3/4" to the length of the tube
and XXL which adds 1.5". XL is $19.95 and XXL is $21.95.
Nordic Barrel Clamp - Nicely machined barrel clamp to secure your
Nordic extended tube. For 12 gauge only. Available with tactical
rail for $47.95 or without tactical rail for $31.95.
Note: we now have barrel clamps modified to work with Mossberg
shotguns. Make your selection below.
Nordic Tactical Rail for Barrel Clamp - this is the tactical rail that
screws directly into your Nordic Components barrel clamp. Allows you to
attach lights and other accessories directly to your barrel clamp.
Includes hex screw.
- Standard Bolt Handle
-
BFB Bolt Handle
Nordic Components Benelli Bolt Handle - this is the extended bolt
release that exactly matches your Nordic extended tube. Same unique swirl
design pattern that provides a sure, non-slip surface when needed to charge your
gun quickly for those empty chamber starts. Fits Benelli M1/M2/Beretta
Extrema/Extrema 2/Franchi 620 & 720. No gunsmithing required.
Now available - the new "BFB - Big Fat Bolt Handle,
which is a larger diameter (approximately 5/8") non-rotating bolt handle for Benelli shotguns.
Choose from the standard bolt handle or the new BFB handle. Note the
Benelli handles will not work with the M4 or older style M1s. Standard bolt
handle is $24.95 and the BFB is $29.95.
Nordic Components FNH/Winchester Charge Handle - this is the extended bolt
release that exactly matches your Nordic extended tube. Same unique swirl
design pattern that provides a sure, non-slip surface when needed to charge your
gun quickly for those empty chamber starts. Fits Winchester SX2/SX3 and
FNH SLP 12 gauge shotguns. No gunsmithing required.
Nordic Components Remington Bolt Handle -
this is the extended bolt
release that exactly matches your Nordic extended tube. Same unique swirl
design pattern that provides a sure, non-slip surface when needed to charge your
gun quickly for those empty chamber starts. Large diameter makes for a
sure grip when needed. Fits Remington 1100 and 11-87 SLP 12 gauge shotguns. No gunsmithing required.
Nordic Components Mossberg Bolt Handle -
finally an oversize charge handle for the Mossberg shotguns. This
particular handle fits the 9200, 930SPX, and 935 series guns.
Oversize Benelli Bolt Release Button - installs over factory release
and requires drilling and tapping of existing button. 11/16" diameter. Free shipping.
Low Drag Magazine follower - aluminum follower, teflon coated and
anodized. Eliminates shell binding that can occur when feeding from high capacity
tubes. Works with all 12 gauge shotguns,
except the Mossberg 930 SPX.
| 
