Offered below are just a few of the great Dawson Precision products for Glock, STI/SV and Para Ordnance pistols. Check with me for all your Dawson Precision needs and I can save you some bucks. Please note: none of the Dawson Precision front sights extend beyond the slide cutout on model 34 or 35 pistols.
Glock Gen 4 Ice Magwells - the popular Ice magwell is now available for Gen 4 Glocks. We current have black and silver magwells for use on guns without a backstrap, or with the medium backstrap. We are not currently stocking the magwell needed if the large backstrap is in use. All magwells include insert, grip plug, and screw. Weighs 2.16 oz. Works on the following Gen 4 models: G17, G17L, G22, G37, G31, G34, G24, and G35. Price is $79.95.
Glock Sight Installation. Simply ship your slide (without barrel or guide rod assembly) and we'll install your sights, and ship back to you insured for $45. In most cases, we install the sights and ship out the next day. There are times when this is not possible obviously, when we are at a match or happen to be out of a particular sight. Add the installation option with the radio button below and ship your slide to CPWSA at 84 Ridgeline Road, Talking Rock, GA 30175. Sights will be installed by a certified Glock armorer. Note: we only do sight installs for sights purchased here. We do not test fire or zero sights. We measure to ensure the new sights are in the absolute middle of the slide.
MGW Glock Sight Tool - want to put your sights on your Glock yourself? Here's the best tool for the job. This is the MGW tool with the slanted edges. I've used them all and I think this tool is the best one for all Glock sights. Price is $119.95.
Ice Magwell for 1911 Pistols - the new CNC machined magwell from Dawson that incorporates a checkered mainspring housing into the magwell. Easy to install with all the necessary tools included. Fits both IPSC and IDPA box. As with all Ice magwells, has the replaceable delrin insert for super slick reloads. Available in black or brushed silver finish.
Tool-less Guide Rod - they're finally back! A great upgrade for your pistol Main rod is machined from one solid piece. No threads to cause stress points where this part can break. The tool-less design is brilliant. The lock lever is slightly below flush and designed so it stays put until you wish to lock it in place to disassemble your pistol, with no tools! That's right. No tools, pins, or clips needed. It locks the spring, guiderod, and spring plug in one neat assembly so you can easily remove it or replace it. There are two rods available. One Fits 1911, Kimber, STI and SV with 5 inch bull barrels and the other fits standard bushing barrel type guns. Pistol must be able to remove spring plug from the rear of the slide. Includes Tool-less Guide Rod with Full Shoulder Reverse or Standard Bushing Barrel Type Spring Plug. Note: these do not work with the Springfield Operator TRP series guns. The bushing model rod is $60 and the bull barrel model rod is $70.
Dawson Precision 5" Guide Rod - keeps your spring from binding. Unique design is very durable. One piece and removes from back of slide. Made of durable stainless steel with take down hole. Includes bushing. Fits all 1911 and 2011 5" guns.
+1 Plus SNL Basepad for STI/SV Magazines - Dawson took the best base pad and made it better. How you may ask? They used every bit of room there was in the USPSA 140mm mag gauge with this pad. It still has the great DP TOOL-LESS design. Tests have given as many as 21 rounds in a 140mm STI .40 caliber mag, allowing you to start with 22 in the pistol. This enables a speed reload with 20 in the mag! Be aware S.N.L. stands for "sometimes not legal". Due to variations in mag tubes, be sure to check your mag before the big match.
Dawson Ice Magwell for Glocks - The long awaited Ice magwell for Glocks has finally arrived. This one is destined to be as popular as it's STI/SV/Para counterpart. Added benefit of the Glock model is the "Seattle Slug" like attachment plug that adds some much needed weight to the frame of the gun. Delrin insert is replaceable just like in the STI model. Available in black and silver finish. White and black delrin inserts are available below. Note: magwell will not fit the Gen 4 guns or compact or large frame Glocks or the 21 SF. Note: some minor fitting is required when using the Ice magwell on the new Glock RTF frames. Look below for the heavy magwell.
International Base Pads - for use at international matches where your gun and mag must fit "in the box". Available in silver and black and fit STI/SV magazines.
Dawson Heavy Magwell for Glocks - This magwell is just like the Ice Magwell above, except this one adds much more weight to the butt of the gun. This magwell adds 5.5 ounces to the weight of the gun to significantly reduce felt recoil, while also providing the expected Ice magwell functionality. This magwell is nearly twice the weight of the standard Ice Glock magwell. Delrin insert is replaceable on this model as well. Available in black finish. Note: magwell will not fit compact or large frame Glocks or the 21 SF. Dawson has discontinued the silver heavy magwell. Note: some minor fitting is required when using the Ice magwell on the new Glock RTF frames.
Fiber Rear and Front Target Rear Tritium Set
Dawson Fixed Tactical Carry Sights for Glock pistols - Snag free rear has no sharp corners and features recessed dovetail set screw for added security. Rear sight is available in either target, two rod fiber optic, or two dot tritium configurations. Rear sight notch is.125 wide and perfect for tactical and competitive applications when paired with the included .105 fiber optic front sight. The two dot tritium rear is mated with a .125 tritium front. Target model rear features ultra-fine serrations to cut down glare. Fiber optic model features counterbored inserts to prevent "halo" effects. Price is $80 for the target rear/fiber optic front, $90 for the fiber optic set, and $120 for the tritium set.. The tactical tritium set is the sights I use on my personal duty and carry guns.
Dawson Precision adjustable sight set - the finest competition sight available for the Glock in my opinion. There are two models to choose from. The front sight is the same on both models and has a serrated front post, .100 wide with a .040 red fiber insert. The rear sight is fully adjustable for both windage and elevation. The fiber optic model has dual green fiber inserts in the rear sight. The serrated target model has a serrated rear target blade. Both sets come complete with installation tools, instructions, and extra fiber rod. This sight set ships with the .285 tall front. A .300 tall front is also available. If you want the .300 tall front simply note in the order comments and the necessary adjustments will be made to the order.
Dawson Fiber Optic Glock Front Sight - This is the Awesome Optic front sight made specifically for Glock pistols. Comes with both red and green spare fiber rod and installation tool and instructions. Serrated front contrasts with fiber rod for great sight visibility. .105 wide blade. Two models, one for Novak or factory Glock rear sights, and another for Heinie rear sights. Fiber optic rod is sized .040 and comes with red and green fiber optic rods.
Dawson Fiber Optic Front Sight for STI Pistols - this is the same great Dawson fiber optic front sight for STI pistols. Serrated front is .180 tall; the correct height for STI 1911 and 2011 guns with factory adjustable rear sights. (Note: STI guns with factory fixed rear sight need a .160 height front). Available in .090, .100, or .125 widths. Comes with extra .040 green and red fiber rods and installation tool.
red green pink
Fiber Optic inserts. Never hurts to keep some spares in case of breakage. Available in red and green in .040 and .060 sizes, and pink in .040. Sold in 4" lengths. My Dawson sights come with .040 fiber. .060 can be used but the sights must be drilled out to accept the larger .060 size fiber rod. The pink is not a hot pink, but works well outdoors when the sunlight may result in the red being too overwhelming.
Ice Magwell -- for STI/SV pistols. "Reloads Slick As Ice". I like the magwell for the obvious reloading advantage, but also because of the way it consistently positions my hand up into the grip safety on the draw. Comes with a black delrin insert that really speeds up those reloads. When the insert starts getting beat up, you just pop another one in. Available in silver, red, blue, and black.
Ice Magwell Inserts - available in both black and white for Dawson Precision STI/ SV
and Glock Ice Magwells. Note the Glock and STI/SV inserts are not
interchangeable. Replace your old beat up insert and make your magwell just like new again. Select desired color and magwell type below.
Ice Magwell Inserts - available in both black and white for Dawson Precision STI/ SV and Glock Ice Magwells. Note the Glock and STI/SV inserts are not interchangeable. Replace your old beat up insert and make your magwell just like new again. Select desired color and magwell type below.
Dawson +1 tool less basepads for STI/SV magazines are CNC machined from billet aluminum for exact fit and long-lasting durability. Cleaning your mags is a breeze with these pads. Slide the lock gate forward, remove the spring and follower, run your hard bristle and soft fiber brush thru the tube, put everything back together and you're done. For high capacity magazines only. I use them on post ban replacement 140mm and 170mm tubes. Available in black, blue, red, and silver. All colors in stock.
Dawson Precision Glock Extended Basepad Kit - Tool-less Design. Slide opens and closes to remove base pad. Removes in a second to clean your high cap magazine. Maintains 140 mm rule for USPSA and increases capacity to the maximum. Adds 5 rounds to 15 round 40 mags and more to 9 mm mags. For small frame Glock only. Made from high strength aircraft aluminum. Comes with extra power mag spring and instructions on how to install. Use only with 9 mm and 40 S&W Glocks. Available in black only. Note: these basepads will not work with 10 round magazines or with magazines for compact or subcompact model Glocks.
Out of stock. Been waiting on more of these for about 4 months. I do have the Arredondo Glock mag kits in stock.
Dawson Competition +1 STI Follower - Designed to add capacity, improve reliability and never lock the slide back after the last round. Works with 9 x 21, 9 x 23, .38 Super/Super Comp, .40 S&W & .45 ACP. Spring in picture is not included.
Dawson Hyper Drive Firing Pin - heat treated from stainless steel, this pin decreases lock time with a straight shank design not affected by primer flow. Extended length for competition use. Fits 1911, Kimber, Springfield, STI, SV, and Para in 9mm, 38 Super, and 40 S&W calibers. Series 80 compatible.
Dawson Mag Button - this is the Lo Pro or low profile button. Not too high so you have to worry about accidental release, yet allows for easy release when you need to make that fast reload. Checkered face for positive look and feel. Available in blue and stainless steel for 1911s, Para, STI, and SV applications.
Aluminum Shock Buffs - eliminates the bounce that traditional shock buffs generate. Acts like a dead blow hammer to reduce recoil. Can also be used to shorten the stroke on full length guns. CNC machined from aircraft grade aluminum, not molded or stamped. .100 thick.