MagPul

Sling Rail Attachment - (SRA) - provides a forward mounting sling attachment for any type of clip in sling. Made from black phosphate finished steel and attaches to any 1913 picatinny rail. Withstands stress tests of over 300 pounds, yet only weighs 1.3 ounces.

iPhone Field Case - designed for the iPhone 4. Made from the same polymer as the original Magpul device. Snap on design for easy installation and removal. PMag style ribs provide a sure gripping surface yet slides easily in and out of pants pockets. Semi-rigid construction offers impact protection. Available in black, flat dark earth, and OD green.

Angled Fore Grip (AFG) - Low-profile forward grip/hand stop takes advantage of natural body mechanics to give the shooter more precise control, faster pointing, and less operator fatigue. The Magpul AFG™ (Angled Fore-Grip) positions the support hand close to the centerline of the bore for maximum recoil control to aid in fast, accurate follow-up shots. Provides a consistent reference point for finding the correct hand position quickly when mounting the weapon under stress. Shooters who fire handguns a lot will love the familiar weak hand position the AFG offers.

The natural, ergonomic hand position with the palm facing up results in better blood flow than the “clenched fist” stance often used with vertical grips that leads to fatigue and loss of sensation during long periods in the ready position. Improves on the “thumb break” hold often used with standard vertical grips by allowing the thumb to rest comfortably alongside the top rail, pointing forward, with the rest of the hand in full contact with the forend. Heavy-duty reinforced molded polymer construction stands up to the hard knocks of tactical operations, and deep, molded-in grooves help you maintain a firm grip even with wet hands.

Interchangeable inserts give the choice of a straight, uninterrupted gripping surface or one with a convenient ledge to support the index finger. Slides over any Picatinny-style rail and locks securely in place with a hardened steel crossbolt. The AFG may be installed on tactical shotguns and other rifles with railed forends; won’t interfere with insertion and removal of magazines on AK-47s. Available in black only at this time.

308 PMAG - all the benefits of the PMag you're used to for your AR15 designed for your 308. Lightweight 20-round 7.62x51 NATO / .308 Winchester magazine compatible with SR25-pattern rifles such as the Knight's Armament SASS/MK11, DPMS LR308, LaRue Tactical Stealth OSR, and others. Designed with long/heavy projectiles such as the 175 grain M118LR in mind. The PMAG 20-LR features true 20 round capacity, a constant curve body, four-way anti-tilt follower, and pop-off dust cover to prevent from dirt and debris and protect the feedlips during long-term storage. When not in use, the dust cover can be stored on the floorplate. Available in black only.

PMAG™s cannot be shipped outside the United States of America, including APO addresses. Additionally, these cannot be shipped to California, Hawaii, New Jersey, New York, Washington, D.C., Maryland, Massachusetts, Chicago, IL, Aurora, IL, Oak Park, IL, or South Bend, IN.

Magpul PMAG™ - I started using these exclusively about a year ago. They are the best mag available in my opinion and tough as nails to boot. (Plus you need them for your handy Nordic PMag 47 round coupler.) Lightweight 5.56 NATO, AR-15/M-16 compatible magazine. Features a pop-off storage/dust cover that alleviates pressure on the magazine feed lips, allowing for long-term storage of loaded magazines without risk of feed lip creep that often causes malfunction in standard aluminum magazines. PMAG™ utilizes a resilient stainless steel spring for corrosion resistance. Patent pending design allows for a more aggressive constant curve of ammo stack than found on other magazines. Can be seated on closed bolt with a full 30 rounds loaded. Floorplate lock. Proprietary anti tilt follower. Debris grooves built into mag body. Available in black, window or non-window version. Don't forget your 48 round PMag coupler available in the Nordic Components section, or the assembled window PMAG with extender on the 3 Gun Stuff page.

Magpul® PRS™ (Precision Rifle / Sniper – AR15/M16 Model - a drop-in, precision-adjustable butt stock for rifles with A1 / A2 fixed stocks. Designed to offer the fine-tuned, customized feel of a precision target stock, the PRS™ is adjustable for both cheek riser height and length-of-pull without sacrificing the durability necessary to withstand the operational environment. Compared to the A2 stock, the PRS™ can shorten the LOP by 0.25” or extend it by 0.75”. Machined aluminum adjustment knobs feature positive-locking click detents to maintain position under recoil and allows easy, tool-less adjustments by simply rotating the knobs. Machined aluminum butt-plate and alloy steel adjustment shaft provide stability and strength to withstand severe impact conditions. Rubber butt-pad offers positive shoulder purchase to prevent slippage for optimal accuracy even with body armor or modular gear. Bottom Picatinny-type rail allows for monopod use, additional sling mounts or storage. Stock includes all mounting hardware for A1 / A2 type rifles with fixed stock. Available in black and OD Green.

Note: The PRS™ is a direct replacement for an A1 or A2 fixed stock. Fitting to a Carbine will require a Rifle Receiver Extension tube, Rifle Buffer and Spring (not included).

Note: DO NOT USE THE PRS™ AR15/M16 ON AR10-TYPE RIFLES DUE TO CHARGING HANDLE CLEARANCE ISSUES!

Features

Mounts to Rifle Receiver Extension tube without A2 Spacer (Not included)
Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG
Machined aluminum adjustment knobs with positive locking click detents
Black phosphate coated solid steel adjustment shafts
Bottom Picatinny-type rail for use with monopod
Sling Mounts
Front / Rear - 1.25” Sling loops (Left-Right Reversible)

Specifications**

PRS™ AR15/M16 Stock (w/ Rubber Butt-Pad, 0.30”)
Weight, w/ Rifle Receiver Extension: 1.85 lb.
Length, Stock: 10.45-11.45 in.
LOP Adjustment: ~39 Clicks (0.026 in. / click)
LOP Adjustment Range: 1.00 in.
LOP, Min (AR15/M16): 13.3 in.
LOP, Max (AR15/M16): 14.3 in.
Cheek Height Adj: 0.75"
Cheek Height Adj. Range: ~29 Clicks (0.026 in. / click)

ACS Carbine Stock, Mil-Spec Version - patent-pending Magpul® ACS™ (Adaptable Carbine/Storage – Military Model) is a drop-in replacement butt-stock for carbines using mil-spec receiver extension tubes. A streamlined, anti-snag profile shields the release latch to prevent accidental activation and the extra-power lock mechanism uses a premium chrome-silicon spring to avert auto-collapse failure by resisting spring relaxation. Similar to the CTR™, the ACS™ also features a supplemental friction lock system that eliminates wobble for enhanced weapon stability and accuracy. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options. The ACS™ comes standard with a rubber butt-pad which gives positive shoulder purchase to prevent slippage even with body armor or modular gear. Available in black only.

Features

Mounts on Military Carbine Receiver Extension tube (not included, but available below)
Shielded release latch prevents snagging and accidental operation
Premium chrome-silicon lock spring provides positive locking and long service life
Supplemental friction lock eliminates accuracy robbing wobble*
Sloping cheek weld provides a wide contact surface for user comfort
Replaceable 0.30” Rubber Butt-Pad offers an anti-slip surface and increases impact protection
Metal strike plate provides a hardened striking point on toe of stock
Two water-resistant battery storage tubes located on the left and right sides of the stock
Each tube will store up to three CR123 lithium or two AA batteries
Tubes are accessible from the rear via a tethered, hand-removable rubber plug
Storage compartment in tail of stock with positive latching access door on right hand side
Sling Mounts
Mid - Optional QD Sling Mounts accommodate up to 1.5” push-button swivels
Rear / Bottom - 1.00” sling loop

Armalite Mil-Spec 6 Position CAR Buffer Tube (receiver extension) for retractable stocks - this is the buffer tube you'll need if you want to put an ACS stock or a Mil-Spec model CTR stock on a DPMS, Rock River, or other carbine that comes with a commercial tube. Simply replace your buffer tube with this one and your ACS stock or Mil-Spec CTR stock is ready to go on. Comes complete with necessary receiver end plate and receiver nut. Note: these are 7" CAR length buffer tubes.

CTR™ M4 Carbine Collapsible Buttstock - Commerical and Military version - patent-pending Magpul® CTR™ (Compact / Type Restricted – a drop-in replacement butt stock for carbines using commercial or military receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The extra-power lock mechanism uses a premium chrome-silicon spring to avert auto-collapse failure and maintains strength by resisting spring relaxation. The CTR™ also features a supplemental friction lock system that eliminates wobble for enhanced weapon stability and accuracy. The Commercial Model includes an extended 0.55” rubber butt-pad to provide positive shoulder purchase and accommodates longer slant-back extension tubes.

Note: There are two basic types of M4 Carbine Receiver Extensions (buffer tubes): Mil-Spec and Commercial. If you have a Mil-Spec extension on your rifle, make sure to order the Military CTR™ stock. For help identifying which extension is on your rifle, click here. If you need a Mil-Spec tube they are available above.

Features

Mounts on Commercial or Military Receiver Extension tube (Extension tube not included)
Premium chrome-silicon spring provides positive locking and long service life
Supplemental friction lock eliminates accuracy robbing wobble*
Sloping cheek weld combines a slim profile with user comfort
Shielded release latch prevents snagging and accidental operation
Side mounting slots accept optional cheek risers for NON-AR15 / M16 applications
Compatible with Single-Point® sling mounts
Sling Mounts
Rear - Push-button QD sling mounts accommodate up to 1.5” swivels (Ambidextrous)
Rear / Bottom - 1.25” Sling loops
Toe - Lanyard hole for custom para-cord rigs

Specifications for Military Stock

CTR™ Military Carbine Stock (w/ Butt Cap)
Weight, Stock Body: 0.48 lb.
Weight, w/ Receiver Extension: 0.79 lb.
Length, Stock Body: 6.60 in.
LOP Adjustment Range: 3.3 in.
LOP, M4 Collapsed: 10.1 in.
LOP, M4 Extended: 13.4 in.

Mission Adaptable Grip (MIAD) - a drop in replacement for the pistol grip on the M16/M4/AR15 series of rifles. It features removable and replaceable front and rear panels for a custom fit over multiple hand sizes. Grip features improved ergonomics and positive anti-slip texture on both sides and rear back-strap. Features a removable inner core that allows for storage (3 round plug included). Custom storage of batteries (waterproof) or bolt/firing pin is available with optional cores. Full Kit includes 3 size back-straps (S,M,L), 4 front-straps including integrated enhanced trigger guard, 3 round core plug, and installation hardware. Available in Black and OD Green.

Magpul Original Equipment Grip (MOE) - a cost-effective drop-in replacement for the standard pistol grip on AR15/M16 rifles. Designed with improved ergonomics and an anti-slip texture, the MOE Grip accepts standard Magpul MIAD storage cores, and is compatible with the Magpul Enhanced Aluminum Trigger Guard. Will not work with AR10® / SR25 style rifles without modification. MOE Grip includes a basic core plug and installation hardware. Features hand-filling beavertail and positive anti-slip texture; one piece construction sized the same as a MIAD grip with the A1 style (F1) front-strap and medium (B2) backstrap; basic storage core cap is replaceable with standard MIAD cores. Available in Black and OD Green.

MOE Plus Grip - same great design as the original MOE grip, but features a rubber overmolded surface on a reinforced polymer core. Hard polymer bottom edge prevents snags and grip damage. Storage core capabilit accepts optional cores. Includes all mounting hardware.

Full Length XT Rail Panel - provides a semi-rubbery grip surface for improved weapon control. Protects the operator from sharp rail edges. Protects unmounted rail areas from damage. Prevents damage to gear, such as rappelling ropes, that may be abraded or cut by uncovered rail sections. Easily cut for custom fitting. Sections can mount next to each other to form a visually continuous cover. Each panel covers 15 slots of rail.

Enhanced Trigger Guard - an aluminum drop in replacement for the M16/AR15 weapons platform. It features a shallow “V” shape for better use of gloves in tactical shooting or cold weather operations. The Enhanced Trigger Guard is non-folding, has rounded edges, and fills the annoying “gap” at the rear of the standard trigger guard. Finished in black anodized aluminum.

MagPul Battery Assist Device (BAD) - an extended bolt release that allows the shooter to keep hand in the ready position on the pistol grip and operate the bolt catch with the trigger finger. Streamlines bolt catch manipulation to get the weapon into battery more quickly for improved operator readiness and weapon handling efficiency. Easy to install and remove—no weapon disassembly required. The B.A.D. lever clamps securely to the factory bolt release with a Torx® head screw and extends a paddle through the front of the triggerguard to the right-hand side of the weapon. Trigger finger can stay outside the triggerguard as you operate the lever, and factory bolt catch retains normal function with B.A.D. installed. Made of a high-grade aluminum alloy, hardcoat anodized to MIL-A-8625F, Type III, Class 2 spec for extra strength and wear resistance.