|
|
|
|
MGM Switchview Scope Throw Levers - the low profile throw lever popular with 3 gunners, and for good reason. The MGM Switchview™ lever requires a certain amount of clearance between the scope body and the nearest object for proper operation. If you have super low rings this may be an issue. The clearance specification notes are at the bottom of this page. Please measure carefully before ordering. The Switchview™ lever comes in flat black and is available for a variety of scope models.
Click Here for CPWSA medium size Scopecoats modified for use with MGM Switchview throw levers.
The MGM Switchview™ lever for the Burris XTR fits the 1-4x24, 1.5-6x40, 3-12x50, and 6-24x50 models. It needs .260" of clearance between the scope body and the nearest object for proper operation. Fits all XTR scopes and Bushnell Banner wide angle 3-9. The factory says the XTR and Burris Euro Diamond use the same ring.
The MGM Switchview™ lever for the Leupold CQT needs .265" of clearance between the scope body and the nearest object for proper operation.
The MGM Switchview™ lever for the Leupold Mark AR lever needs .253" of clearance between the scope body and the nearest object for proper operation.
The MGM Switchview™ lever for the Leupold Mark IV w/Illuminated Reticle fits the 1.5x5, 2.5x8, 3x9, and 8.5x25 models. The lever needs .240" of clearance between the scope body and the nearest object for proper operation. The lever shown in the picture is a prototype and has not been anodized yet. The Switchview™ lever you will receive is finished in anodized flat black. Note: if you have the Mark IV without an illuminated reticle you'll need the lever below.
The MGM Switchview™ lever for the Leupold VX-3 and Mark IV without Illuminated Reticle needs .225" of clearance between the scope body and the nearest object for proper operation.
The MGM Switchview™ lever for the Leupold VX-II lever needs .253" of clearance between the scope body and the nearest object for proper operation.
The MGM Switchview™ lever for the Meopta Meostar 1-4x 22mm RD Illuminated K-Dot Reticle scope needs .174" of clearance between the scope body and the nearest object for proper operation. It will also fit the IOR Valdada Tactical 1.5-8. This lever fits the Burris MTAC as well as the Swaro Z6 series scopes.
The MGM Switchview™ lever for the Millett 1-4 (DMS-1) and 6-25x56 (LRS-1) needs .256" of clearance between the scope body and the nearest object for proper operation.
The MGM Switchview™ lever for Burris XTR will also fit the Mueller 8-32x 44mm Side Focus Target Dot Reticle scope. It needs .260" of clearance between the scope body and the nearest object for proper operation.
The MGM Switchview™ lever for Leupold VX-3 will also fit the Mueller APV 4.5-14 x 40mm Adjustable Objective APV Reticle scope. It needs .225" of clearance between the scope body and the nearest object for proper operation.
The MGM Switchview™ lever for the NightForce NXS Compact needs .210" of clearance between the scope body and the nearest object for proper operation. Please call for more details. This lever does NOT fit the regular NXS model. The pictures shown are of the regular NXS lever. We will be posting the Compact lever picture soon.
The MGM Switchview™ lever for the NightForce NXS needs .214" of clearance between the scope body and the nearest object for proper operation. Please check closely. This lever does NOT fit the NXS Compact model.
The Switchview™ lever for the S&B Short Dot is so new, no clearance figure is available yet. Please contact us if you are unsure the Switchview™ lever will fit your application.
The Switchview™ lever for the Trijicon Accupoint is so new, no clearance figure is available yet. Please contact us if you are unsure the Switchview™ lever will fit your application.
The MGM Switchview™ lever for the IOR Valdada Tactical 1.5-8 also fits the Vortex Razor HD 1-4 x 24 and 5-20 x 50 scopes. It needs .174" of clearance between the scope body and the nearest object for proper operation. This lever fits the Burris MTAC scope. Dimensions and Specifications
Clearances and Interchangeability Notes
Weight: Switchview levers weigh about 1/2 ounces each.
Clearance requirements between adjustment ring and
mounting hardware:
Night Force NXS .214” clearance 1.692” Dia. – Fits
all NXS scopes – DOES NOT FIT THE NXS COMPACT - also fits the
Vortex Viper PST/ Barska
Millet DMS .256 clearance 1.722” Dia. – Fits all DMS
Scopes
The Switchview for a Millet DMS works just fine on my
Horus Hawk. The timing notch is a little wider than the Horus's but
it clamps down tight. Gap at the screws is 0.0625" when it is
snugged down. Nikkon Monarch 1.740” w/no bump. Swarovski Z6i 1-6
WITH LONGER SCREWS!!!
Burris XTR .260” clearance 1.615” Dia. – Fits all XTR
Scopes, Bushnell Banner wide angle 3-9 (XTR and Burris Euro Diamond
are the same ring) Trying it on a Zeiss Conquest 3-9 - Mueller 8-32
Leupold Mark IV w/ill reticle .240” clearance 1.490”
Dia.- Fits all Mark IV’s w/illuminated reticle 1.5-5 2.5-8 3-9
8.5-25 …basically the entire line of Mark IV scopes with illuminated
reticles
Leupold CQT .265 clearance 1.595 dia. The SVLCQT fits
Bushnell 6500 Elite and Burris Tac 30
Leupold VXIII .225” clearance 1.355” Dia. – All
VXIII’s w/out illuminated reticle and basically the entire line of
Mark IV scopes WITHOUT illuminated reticles
Meuller APV scopes.
Leupold VXII.253” clearance 1.291” Dia. – All VXII’s
w/out illuminated reticles.
IOR Pit Bull .284 clearance 1.932” Dia - Because this
scope only has about 110 degrees of rotation, this will only affect
scopes with very low mounts.
IOR CQB 1.5-8 .174 clearance 1.772” Dia. – Also fits
1.1-4 CQB, Meopta Meostar, and Vortex Razor
S&B Short Dot
Trijicon Accupoint
Mueller APT
Other scopes levers fit list:
Mark IV w/Illuminated reticle fits:
Millet DMS fits:
1-4
6-25x56
Burris XTR
1-4
1.5-6
3-12
6-24
|
|
|
