CPWSA is proud to offer Ready Tactical holsters, competitive and duty gear pistol and rifle mag pouches, shotshell holders, flashlight holders, revolver speedloaders and moonclip holders. These products received excellent reviews in USPSA and IDPA publications. We stock 1.5" belt loop models which are the appropriate size for CR Speed, JR Holster, and Double Alpha belts for USPSA applications, and also work well for the majority of IDPA applications. The IDPA model holsters have the thinner belt loop to prevent daylight from showing between the belt and the holster as required by IDPA rules. The IDPA model holster is approved by and legal for use in IDPA competition. We offer holsters and mag pouches for STI 2011s, various Glock models, Springfield XD and XDM, S&W M&P/Pro/9L, K, L, and N frame S&W revolvers, and 1911 pistols in both right and left hand, mag pouches for AR15, .30 M1 carbines, and .308 magazines which are ambi, and pick 2 shotshell pouches. Custom builds are possible for many other guns, as well as modifications to standard holsters, i.e., open bottom Glock 17 holsters for use with Glock 34/35, 1.75" belt loops for use with Wilderness/Instructor belts, 2" or 2.5" duty belts, etc. Contact us for details. Prepayment is required on all custom orders.
Ready Tactical Spare Parts Kit - this is a complete set of spare retention hardware for your Ready Tactical holster. Kit includes one Colorado nut, one rubber spacer, one tension screw, and screw cover. Be sure to put a drop of blue Loctite on the tension screw to prevent it from working loose and getting lost. Price is $4.99.
Shown with Ruger mags but pouches work with Walther P22, and Browning Buckmark mags as well.
.22 Rimfire Mag Pouch - just like the centerfire mag pouches offered below but for your .22 rimfire pistol. Fits mags for all Ruger 22s, Walther P22s, and Browning Buckmarks. Note: unloaded Walther and Buckmark mags don't fit into the pouch as well because of the design of the pouch, but loaded mags fit fine. Ruger mags fit nicely in the pouch whether loaded or unloaded. These pouches may also work with other 22s not listed but we only had so many 22 models to check the fit with. If you shoot Steel Challenge matches with your rimfire pistol, these are a must have. Price is $22.95.
FNH FNX/FNS Holsters - we were able to get our hands on a FNH FNX 9, so we had a few holsters made up. These holsters were made with a FNX 9 but the FNS should work in them just as well. These are for the 4" barrel guns and are all right hand holsters. We have a limited supply of DOH, IDPA, and 3 gun holsters available.
Solid Belt Loop Pouches Standard Pouch
All Ready Tactical mag pouches are available with a solid belt loop by special order. What we keep in stock is the standard (or claw type) pouch as shown above. The solid loop pouch has a brad that secures the belt loop to the pouch body, instead of the flexible clamshell or claw loop that's on the standard model. The standard pouch can be inserted or removed from your belt without removing the belt, whereas the solid loop pouches must be threaded onto the belt. If you prefer the solid loop model, simply order the standard pistol or AR15 pouch below, and note in the shopping cart comments that you want the solid belt loop model.
Note: I've got 3 Glock 9/40 RH solid loop pouches in stock and ready to ship. Order them here:
Ready Tactical Duty Belt Mag Pouch - need to save some belt space on your duty belt? Then opt for the Ready Tactical duty belt mag pouch. Measures only 1.5" each so you can carry 3 mags, or 2 mags and a 1.5" bezel flashlight, in less belt space than a standard Safariland flap pouch would take up. Will work with duty belts up to 2.5" wide. These are solid loop type pouches. Currently available for Glock 9/40 mags. Other mag styles available via special order. Price with LE discount is $22.95.
Ready Tactical 3 Gun Holster - we're now stocking RH 3 Gun holsters for 5" STIs, Glock 34/35s, Springfield XDM 5.25", and S&W M&P Pro/L guns. The 3 Gun holster provides more security by eliminating the "speed cut" that's on the standard holsters. It is however, still a DOH style holster but with more security than our standard DOH holster. You'll notice in the picture above, the holster material extends up above the pistol's ejection port which offers more security without having to crank down the tension on the holster. Great for 3 gun competition where lots of movement is required, or for anyone who wants more security from their holster. All DOH, USPSA, and IDPA holsters are available in the 3 gun model via special order. We're stocking 3 gun model holsters in RH DOH for 5" STI, Glock 34/35s, S&W M&P Pro, and Springfield XDM 5.25" guns. There is a three to four week approximate wait time on custom orders. Simply order the Custom Build 3 Gun holster from the menu below and note in the shopping cart comments whether you want a DOH, USPSA, or IDPA style, and for which gun the holster should fit, i.e., S&W M&P, XDM, etc. Price on the 3 gun stocked and custom holsters is $75.
Ready Tactical Holster - custom fitted holster with 1.5" belt loop, front sight channel relief, and fully adjustable for tension. Available in dropped and offset (DOH), USPSA, and IDPA models. The DOH holster offers the most clearance, dropping the gun down and away from the body; USPSA production legal, but not IDPA legal. The USPSA model has less offset, sits in a little tighter to the body with no drop; USPSA production legal, but not IDPA legal. The IDPA legal holster has the tighter loop for the belt and is IDPA approved. The DOH holster is $72.99 and the other models are $62.99. Available in both right hand and left hand models for STI/SV 2011 styles, Glock, S&W M&P Pro/9L, Springfield XD/XDM, Springfield XDM 5.25" Tactical, and 1911 model pistols. Note, the XD holster will work for the 9, 40 and 45 gun and is made for the 5" Tactical model. It will work with the 4" gun as well. XD and XDM holsters and pouches are different and are available separately. The M&P Pro/L holster is different than the holster for the standard M&P. All M&P pouches in 9mm and .40 are the same, the .45 takes a different mag pouch.
Ready Tactical Dropped and Offset Holster - Available in RH and LH for Glock 17/22, and 34/35, and RH for Springfield XD/XDM, Springfield XD 4" and 5", XDM 5.25" Tactical, STI 5" Edge/Eagle, and S&W M&P 9/40 Standard/Full Size and Pro/L pistols. Note: the M&P Pro/L holster will work with both 9mm and .40 caliber guns.
USPSA Holsters for 1911s - We offer these models because the DOH is not legal for USPSA Single Stack use.
Ready Tactical IDPA Holster - as the name implies, these holsters are approved for use in IDPA competition. They also make great carry holsters. Now available for the S&W M&P Shield.
Pistol Pouch AR Pouch Offset Pouch
Ready Tactical Mag Pouch - features 1.5" belt claw, which can be threaded onto the belt, or installed/removed without removing belt. Available for STI, Glock, S&W M&P and M&P Pro, M&P Shield, Springfield XD/Beretta/Sig, CZ SP01, Springfield XDM, Caspian, EAA, and 1911 pistols in right and left hand models, and AR15 pouches which are ambi. These mag pouches take up less real estate on the belt, keeping them in a more readily accessible position instead of wrapping half way around your back. That's a huge benefit for single stack and production shooters. You can likely carry six pouches, and the pouches will be positioned more on the side of the hip instead of around behind your back.
NEW ITEM: we now offer offset mag pouches (see pic above) for females, or other shooters who want the basepad end of the mag to set further away from the body. The offset pouch sets the end of the magazine 3/4" further away from the body than the standard magazine. Note in the order form comments if you want the offset pouches. All offset pouches are custom order with a 2 to 3 week turnaround time.
The Springfield XD model pouches will not work with XDM magazines, so be sure to order either XDM or XD pouches depending on your gun type. Also note, the XD and XDM pouches are for 9 and .40 guns, .45 mags will not fit in them. If you want .45 mag pouches, we'll need to special order those.
Pistol pouches are $22.95 and AR15 pouches are $27.95. Notes: If you're a right handed shooter, order the RH mag pouch which you wear on the left side of the body.
Ready Tactical .30 Caliber M1 Mag Pouch - these are designed for left side wear with the magazine positioned bullet forward. Price is 24.95.
Ready Tactical .308 PMag Pouch - these are ambi just like the AR15 pouch. Price is 27.95.
Ready Tactical S&W Revolver Holster - these holsters are IDPA legal and available for 4" S&W K, L, and N Frame revolvers. Available in right or left hand models. Fits 1.5" wide belts. The L frame holsters work fine with the SSR model revolvers also.
Revolver notes: K frame holsters are generic and fit all .38 or .357 K frame guns. L Frame holsters fit all 6 shot guns. N Frame holster fits any N frame gun, except the Thunder Ranch model 325 or any Performance Center guns with the tapered underlug. All S&W 44 magnum revolvers are N frame guns so the N frame holsters and pouches work fine with those. L Frame holsters will not work with the Ruger GP100, it is a custom build holster.
K, L & N Frame Speedloader Holder N Frame Moonclip Holder
Ready Tactical S&W Speedloader Pouch and Moonclip holder- ambi design to fit both right and left hand shooters. Fits 1.5" belts. IDPA legal. Be sure to see notes below:
Speedloader Pouch Notes: K & L Frame pouches will fit all known 6 round speedloader types. K & L frame pouches are not interchangeable. K Frame pouches will only fit K Frame speedloaders, and generally L Frame speedloaders will not work in K frame pouches.
L Frame speedloader pouches work for the Ruger GP100, but the holster for the GP100 is a custom build.
Moon clip holders (six shot) and regular speedloader pouches are in stock for the S&W 45 N Frame.
N Frame speedloader pouches work for the Ruger Redhawk .44, but the holster for a Redhawk is a custom build.
Ready Tactical Pouch for Surefire Flashlights - there are two sizes, one for the Surefire 6P, G2, older model Z2 Combat Lights or any light with a 1.275" bezel. The other size fits the newer style Z2X combat lights or any light with a 1.25" bezel. Note: these light pouches will not work with lights that have a crenellated strike bezel.