Shared Top Border

click-to-call from the web    Warren/Sevigny Sights

 

Home
Up

 

Warren Tactical and Sevigny competition and carry sight sets for Glock pistols.  All Warren Tactical and Sevigny sights are designed to shoot point of aim/point of impact at 25 yards.  If you know that your Glock shoots high, you might want to order a taller (.245) front sight.  If you want the .245 tall front, simply make note of that in the order form comments.  Using the .245 tall front sight will typically lower impact approximately 3 to 4 inches at 25 yards.  Remember that Glocks are production guns, so there could be slight variations in each of them.

Don't forget our Glock sight installation service.  Simply ship me your slide and I'll install your sights, and ship back to you insured for $40.  In most cases, I install the sights and ship out the day after I receive your slide.


 

Warren Tactical sight set - the unique design of the Warren rear offers a very clean and unobstructed sight picture.  Three different sets are available.  Choose from a plain rear and serrated front, a plain rear and tritium front, or a tritium rear and tritium front.  Tritium set is available as a 2 lamp or a 3 lamp system.  Price is $55 for the plain/serrated combo, $82.50 for the plain/tritium combo, $115 for the tritium/tritium 2 lamp combo, and $128 for the tritium/tritium 3 lamp combo.  Go to the bottom of this page for dimensions and specifications as well as sight sets for S&W M&P pistols. 

Note:  front and/or rear sights are available separately.  Simply note which one you want in the order for comments section.        

Warren Tactical Sight Set for Glocks
Qty: Price: $55.00 Shipping: $5.00

Select Product:



   

 

Sevigny Competition sight set - this is the sight set Dave Sevigny used to win the 2005 IDPA Nationals and both the Production and Limited-10 USPSA Nationals.  This design is competition proven...crisp and clean.  Two sets are available.  Choose from a plain rear, serrated front option, or a plain rear, fiber optic front option.  Price is $70 for the plain/serrated combo, and $82 for the plain/fiber optic combo.  Go to the bottom of this page for dimensions and specifications as well as sight sets for S&W M&P pistols.     

Note:  front and/or rear sights are available separately.  Simply note which one you want in the order for comments section.

Sevigny Competition Sight Set for Glocks
Qty: Price: $70.00 Shipping: $5.00

Select Product:



   

Sevigny Carry Sight Set - this set allows the competitive shooter to maintain a consistent sight picture on competition and carry guns.  Rear sight provides all the advantages of the competition model, yet is designed specifically for carry applications.  Available in five models.  Choose from a plain rear/serrated front model, a plain rear/fiber optic front model, a plain rear/tritium front model, or a tritium rear/tritium front model.  Tritium set is only available as a 2 lamp system (one lamp in front and one lamp in rear).  Price is $55 for the plain/serrated combo, $70 for the plain/fiber combo, $79 for the plain/tritium combo, and $115 for the tritium/tritium 2 lamp combo.  Go to the bottom of this page for dimensions and specifications.  

Note:  front and/or rear sights are available separately.  Simply note which one you want in the order for comments section.    

Sevigny Carry Sight Set
Qty: Price: $55.00 Shipping: $5.00

Select Type:



Warren Tactical and Sevigny Sights for S&W M&Ps -  same design as the popular Glock sights.  Available in Sevigny competition rear with fiber optic front, and Warren Tactical tritium rear with tritium front in 2 and 3 lamp configurations.  Price is $82 for the Sevigny Competition set, $115 for the Warren 2 lamp tritium set, and $128 for the Warren 3 lamp tritium set.  The front sight dimensions are .165 x .125 for the tritium front and .165 x .115 for the fiber optic competition front.  Currently out of the Warren 2 lamp tritium M&P sight sets.  All other sets are in stock and ready for immediate shipment.

Note:  front and/or rear sights are available separately.  Simply note which one you want in the order for comments section.

Warren/Sevigny S&W M&P Sight Set
Qty: Price: $82.00 Shipping: $5.00

Select Set Desired:



Technical Specifications:

Sevigny Competition
Specifications:
 
Front Sight: .115” wide x .215” tall, 70 LPI serrations, black oxide finish, 3/16” hex screw retention
 
Rear Sight: .150” wide x .120” rear notch, flat back drafted surface (no distracting points, edges or serrations) with nominal 1/8” radii corners, hardened steel, black oxide finish, dovetail press fit and stainless set screw for back-up retention
 
Made in the USA, PATENTED design
 
Drift adjustable rear only
 
Installation recommended by a qualified gunsmith only.
 
 
Sevigny Competition w/fiber optic front sight
Same as the “Competition”, with a fiber optic front sight.  When heated, the 1mm fiber optic rod melts to a 1/16 th of an inch diameter.  The top of the rod diameter and top of the front sight appear flush when aiming.
 
Specifications:
 
Front Sight: .115” wide x .215” tall, 70 LPI serrations, 1mm fiber optic through diameter with a .060” front counterbore, black oxide finish, 3/16” hex screw retention.  Green and Red, 1mm (.040”) fiber optic rod included, approx. 2 ½” long
 
Rear Sight: .150” wide x .120” rear notch, .250” tall, flat back drafted surface (no distracting points, edges or serrations) with nominal 1/8” radii corners, hardened steel, black oxide finish, dovetail press fit and stainless set screw for back-up retention
 
Made in the USA, PATENTED design
 
Drift adjustable rear only
 
Installation recommended by a qualified gunsmith only.
 
 
Sevigny Carry
Same as the “Competition”, with a wider front sight and rounded outer corners on the rear sight.
 
Specifications:
 
Front Sight: .125” wide x .215” tall, no serrations, black oxide finish, 3/16” hex screw retention
 
Rear Sight: .150” wide x .120” rear notch, .250” tall, flat back drafted surface (no distracting points, edges or serrations) with nominal 1/8” radii top corners, designed to be more “Carry Friendly” with rounded outer corners, hardened steel, black oxide finish, dovetail press fit and stainless set screw for back-up retention
 
Made in the USA, PATENTED design
 
Drift adjustable rear only
 
Installation recommended by a qualified gunsmith only.
 
 
Sevigny Carry w/Tritium
Same as the “Carry”, with Tritium inserts for low light use.
 
Specifications:
 
Front Sight: .125” wide x .215” tall, no serrations, black oxide finish, 3/16” hex screw retention
 
Rear Sight: .150” wide x .120” rear notch, .250” tall, flat back drafted surface (no distracting points, edges or serrations) with nominal 1/8” radii top corners, designed to be more “Carry Friendly” with rounded outer corners, hardened steel, black oxide finish, dovetail press fit and stainless set screw for back-up retention
 
Tritium installed by Trijicon.  Large green tritium front with white outline.  Small yellow tritium rear .Vertical two dot configuration. 
 
Made in the USA, PATENTED design
 
Drift adjustable rear only
 
Installation recommended by a qualified gunsmith only.